Thermostat Thermoregulator Sensor Microcomputer Temperature Humidity Controller for Incubator Cooling Heating Fridge Fish Pet Reptile Aquarium Fish Tank Incubation

Instruction :
– When the thermostat is working normally, press and hold the power button for more than 3 seconds to turn off the thermostat. When the thermostat is off, press and hold the power button for more than 3 seconds to open the thermostat.
– When the thermostat is working normally, the digital tube displays the current temperature measurement value, and performs automatic recognition conversion of the cooling heating operation mode.
– When the measured temperature temperature set value + temperature difference set value, enter the cooling state, the Cool indicator light is on, the cooling relay normally open contact is closed; the Cool indicator flashes, indicating that the cooling device is in the press delay protection state; when measuring the temperature temperature set value, the Cool indicator is off, and the normally open contact of the refrigeration relay is disconnected.
– When the measured temperature temperature set value – temperature difference set value enters the heating state, the Heat indicator light is on, the heating relay normally open contact is closed; when the measured temperature temperature set value, the Heat indicator is off, the heating relay normally open contact disconnect.

Specifications :
Product Name:Thermostat.
Product model:DTC1200.
Supply voltage:AC110~230V.
Temperature range:-40C~+99C.
Temperature measurement accuracy:1 C (-40 C ~ +70 C).
Sensor line length:100cm.
Thermostat size:93mm*56mm*34mm.
Output capacity:cooling (compressor 3A) heating (10A/250VAC).

Package Included :
1 x Thermostat.